The high-speed freezing centrifuge is a kind of equipment with a rotating speed of more than 20000 rpm. In addition to the performance and structure of the low-speed freezing centrifuge, the angular heads used in the high-speed centrifuge are made of titanium alloy and aluminum alloy. The centrifugal pipe is made of polyethylene hard plastic with cover. Such centrifuges are mostly used to collect microorganisms, cell fragments, cells, large organelles,and sulfuric acid precipitates and immune precipitates.

　　Precautions for use

　　1. Usually, the centrifuge has a registration form. Please make sure to register the user, rotor, speed and time before use.

　　2. The centrifugal pipe must be well balanced, and pay attention to the position balance when putting in the centrifugal Tuo. Never exceed the maximum speed limit of the centrifuge or centrifuge.

　　3. Only after reaching the preset speed can you leave the centrifuge; if there is any abnormality, stop the machine immediately.

　　4. Usually, you can hear the sound to know whether the centrifuge is normal or not, and you can also pay attention to the vibration of the centrifuge.

　　5. After using the high salt solution samples such as ammonium sulfate, be sure to clean the centrifugal Tuo and clean the rotating chamber of the centrifuge.

　　6. Because of its high speed and complexity, ultrahigh-speed centrifuge needs special training.